EXPLORER SERIES-PET PREFORM BEAM ROBOTS

Detail

• PET perform beam robot are designed for take-out of 350cc-1500cc PET perform, applicable to all types of PET injection mold machine ranging from 200T to 600T with 8~48 cavities mold. Installed on fixed platen and place PET outside of rear safety door. Enclosed cooling system on EOAT to cool the taken-out product., greatly shorten cooling time in mold and increasing output. With AC servo motor driven, take out products at high speed.
• Structure Feature:
  • Integral arm design, super strong structure and with high rigidity linear slide rail on traverse side-entry axis, ensured long use life. Operate with belt to make it clean and without oil sludge. With AC servo motor driven, take out products at high speed with accurate position.
• Specification of taking-out action:
  • Waiting out of safety door.
  • Swivel-in, sucking and waiting
  • IMM ejctor
  • Swivel-out to place products.
  • Rotated by 90?and coercive cooling products.
  • Rotate back and standby.
• Jig for special PET, compelling cooling ,shorten the cooling time in the mold
• Detecting system:
  • Vacuum pressure detecting to ensure EOAT sucked products. It will give alarm and stopped if EOAT failed to suck products.
• Controller:
  • User-friendly touch type LCD control screen.
  • Full numerical setting, display and record the failure automatically.
  • Special EOAT keeps the PET from damage, coercive cooling shortened the cooling time in mold.
  • Han-held touch panel controller.
  • Touch panel screen is easy to learn and operate.
  • Hand-panel controller makes it convenient to adjust robot.

Feature

Specification

General specification

Main specification: