PV SERIES-PICKER FOR VERTICAL INJECTION MACHINE
Model No.︰PV650/750/850
Brand Name︰alfarobot
Country of Origin︰China
Unit Price︰-
Minimum Order︰-
Product Description
Detail
- Linear slide rail and alloy aluminum extrusion are applied for arm
- Easy to change the swivel part, non-swivel also for optional
- 180 degree swivel is optional for jig
- Control system:
- Palm controller with dialogue type operation interface, the display language is changeable.
- Eight(8) sets built-in programs and 12sets TEACH programs can meet all the requirements.
- Fifty(50) sets memory for mould, easy to set while changed mould.
- Automatically detecting, displaying and recording the failures.
- Screen can display all the input/ output connections points, convenient for fast maintenance.
- LED display important signal, such as Safety Door, MOP, Open/ Close Mould.
- A large LCD display provides simple programming and setting of all parameters.
Specification
Power source:
| Power source | Power source | Max. allowed pressure | Drive system | Control system |
| 1øAC220v±10v
50/60HZ |
0.2 | 8kgf/cm2
0.8Mpa |
Pneumatic cylinder | GA28 |
Pneumatic cylinder:
| Model | PV350 RT | PV450RT | PV550RT | PV650RT |
| Recommended IMM | 20-30 | 30-60 | 50-100 | 80-150 |
| Side-entry Stroke(mm) | 350 | 450 | 550 | 650 |
| Side-entry Stroke(mm) | 75 | |||
| Side-entry Stroke(mm) | standard: no swing/optional: R: 60°~90° | |||
| Gripper rotate(degree) | standard: no swing/optional T: swing for 180 degree | |||
| Max. loading(Kg) | 1 | |||
| Dry take out Time(sec) | 0.6 | 0.6 | 0.8 | 0.9 |
| Dry cycle Time(sec) | 3.8 | 4 | 4.2 | 4.4 |
| Air consumption(NI/cycle) | 4 | 4.5 | 4.8 | 5.2 |
| Net weight(kg) | 20 | 22 | 24 | 26 |
Payment Terms︰ TT/DP